Dodge RAM 1500 Check Engine Light Blinks When Accelerating, What is the Cause?
If you have a Dodge RAM 1500 check engine light blinks when accelerating, then you should take your vehicle to a professional mechanic. There are several possible causes for this problem.
The first cause is a faulty wiring harness or a bad sensor. The wiring harness is used to connect various components of your vehicle and can get damaged over time. A bad sensor will also cause the check engine light to blink.
A second cause could be an internal fault in one of the sensors on your vehicle. An internal fault with one of these sensors can cause them to send incorrect signals to other components of your vehicle which then causes them not work properly or even fail completely.
A third cause could be related to the fuel system or ignition system. The fuel system controls how much fuel is delivered into each cylinder while the ignition system controls how much power is delivered by each cylinder’s spark plug at any given moment in time during normal operation conditions under load conditions with maximum acceleration.”
The fourth cause could be related to the engine computer or ECU (also called the powertrain control module, or PCM). The ECU controls all of the sensors and other components on your vehicle, as well as how they operate together in order to deliver power. A fifth cause could be related to an electrical short caused by damaged wiring harnesses or connectors inside of your vehicle’s engine compartment.
If you suspect that your vehicle’s ignition system is causing the problem, it’s important to take it out for a test drive. If you feel a slight hesitation when accelerating and everything else seems fine, then it could be related to your engine computer or ECU.
The Dodge Ram 1500 Check Engine Light Blinks When Accelerating, What should I do?
If your Dodge RAM 1500 check engine light blinks when accelerating, there may be a number of reasons for it. The first thing you should do is take the vehicle to a mechanic for diagnosis, but there are some things you can do at home to try and troubleshoot the problem yourself.
First, check your gas cap. If it’s loose or missing, this can cause problems with fuel pressure, which can lead to issues with emissions systems. Make sure you’ve got a good seal on your gas cap and that it hasn’t been leaking any fumes into the cabin of your car.
If that doesn’t solve the issue, then check your oil levels and make sure they’re within normal levels for your vehicle. Low oil levels can cause issues with getting enough fuel into the engine and also cause problems with emissions systems.
If neither of these solve the problem, then it may be time to have your vehicle diagnosed by a professional mechanic so they can determine what’s causing this problem and if anything needs to be repaired or replaced before it becomes more serious than just flashing lights on your dashboard!
