The Dodge Viper is a high-performance sports car that has been in production since 1992. The vehicle is available in multiple trims, including GTS and SRT.
The Dodge Viper uses a V10 engine and rear-wheel drive system. It comes with a manual transmission or an automatic transmission with paddle shifters.
The Dodge Viper was originally built by Chrysler but is now built by Fiat Chrysler Automobiles (FCA). In 2003, the nameplate was changed from Dodge Viper to SRT Viper because of a lawsuit brought against Chrysler by the owner of the Viper nameplate, David Martinez.
In this article, we will discuss why your Dodge Viper Check Engine Light came on and what you should do when it does.
Have you noticed that your Dodge Viper Check Engine Light is on? The light may be flashing or staying on and it could mean that there’s a problem with your vehicle. Here’s what you need to know about why the light is coming on, how to troubleshoot it, and what to do if your Dodge Viper Check Engine Light won’t reset.
Why Is Your Dodge Viper Check Engine Light On?
There are many reasons why the check engine light comes on in your Dodge Viper. The most common issues include:
-Bad gas cap: If you don’t replace your gas cap after refueling, the check engine light will come on. This is because of evaporated gasoline that can’t vent properly through the cap.
-Low fuel pressure: If your car has low fuel pressure, it might not be able to operate at peak performance levels, which may cause the check engine light to come on.
-Fuel level sensor failure: When this sensor fails, it can cause problems with fuel delivery and result in a check engine light being illuminated.
What are the common causes of Dodge Viper Check Engine Light coming on?
The Dodge Viper is a high-performance car. It has a powerful engine that can produce up to 440 horsepower and 600 ft-lb of torque. The car is also equipped with advanced technology, including a high-tech engine control system that monitors the performance of various parts of the car’s engine. As such, it is not uncommon for the Check Engine Light to come on and indicate that there is something wrong with your vehicle’s engine.
There are many reasons why this light may come on, including:
– Low engine oil – The engine requires oil in order to function properly; if there is not enough oil in your vehicle’s engine, it will overheat and cause damage to other components.
– A bad ignition coil – This component controls spark timing inside the combustion chamber and helps ignite fuel at precisely the right time during combustion. If this part fails, it can cause misfires which could lead to damage in other parts of your vehicle’s engine as well as reduced fuel economy or even stalling out while driving down the road!
– A bad knock sensor – This sensor detects detonation within cylinders by measuring pressure waves created when fuel burns within those cylinders (detonation means that the engine is burning fuel at the wrong time, which can cause damage to other components). If this sensor fails, it will not be able to detect detonation, which could lead to an increase in fuel consumption and emissions as well as reduced engine performance.
How to Reset Dodge Viper Check Engine Light?
Resetting your Dodge Viper Check Engine Light is easy and all you have to do is turn off your car’s ignition for about 10 seconds, then restart it again. This should reset your check engine light and allow you to drive safely until you get it checked out by a professional mechanic who will diagnose the issue and repair it as soon as possible . If you don’t reset your check engine light, it will continue to flash and eventually drain the battery.